Combinations

The only reason you would choose a whirlpool over a spa, or vice versa, is personal preference. Do you prefer jets mounted in the side of the bath, or in the base? But you may be finding it hard to choose. Or you may simply want the most advanced system there is. Or you may just be a self confessed bath addict, and want it all. And you can have it all, when you opt for a combination system.

Remember, all systems include:

• self-draining, Bronte Maxidrain pipework to keep pipes dry and clean
• Bronte Maxicare antibacterial pipework on the whirlpools for the safest, most hygienic system you can buy
• a pre-fitted pump on the whirlpools, for ease of installation
• a pre-fitted air blower on our spa, for ease of installation
• an RCD circuit-breaker, for safety

Hand-built

We never forget that it's your bathroom. so we build choice into everything. Our comprehensive range offers something for everyone, from economy solutions to the highly functional and more expensive

Ease of Installation

All Bronte baths are supported by a heave-duty frame, with the massage-power pack already fitted .the means all your plumber has to do is connect the taps and waste and all your electrician has to do is wire in the power supply (With a bath sourced elsewhere we use it's own frame and fit our own pump stand to take our pump)

Your guarantees

All Bronte hydromassage systems comply with European Standard EN60-335 part 2

They are also fully guaranteed against faulty workmanship or materials as follows

• Controls 2 years
• Pipework 10 years
• Bronte bathtubs 25 years

Please note that these periods do not represent the expected lifespan of each component but a reasonable time within which any faulty workmanship or parts should come to light. These guarantees do not affect your statutory rights. Terms and conditions apply.

Down Load Planning Sheet (PDF format)

Electricity supply
13 Amp
230V
50Hz
Connection must be made through the RCD provided.
Standard pump: 900W, 3.9 Amp
High-powered pump: 1200W, 5.2 Amp
Blower: 600W, 2.6 Amp
(The pump and blower are pre-mounted to the bath on a rigid frame, for easy installation.)
Plumbing
All Bronte baths are supplied un-drilled, for your choice of taps.
Plumbing the bath in is the same as for any standard bath.
Installation instructions
If you would like a copy of the installation instructions prior to receiving your bath, please contact us and we’ll be happy to send a copy to
you..